Why Is My Computer Stuck on Automatic Repair? Troubleshooting Tips & Solutions
- 1. Understanding Automatic Repair and Why It Happens
- 2. Common Causes of Automatic Repair Failures
- 3. How to Fix Your Computer Stuck in Automatic Repair Mode
- 4. When to Consult Professional Computer Repair Services
1. Understanding Automatic Repair and Why It Happens
Automatic Repair is a built-in troubleshooting tool for Windows operating systems that can be activated when the system detects boot-up issues. It's designed to help resolve problems automatically by scanning your computer for errors and attempting repairs. However, in some cases, it may get stuck during the process, leaving users frustrated.
The problem may occur due to system files becoming corrupted, recent updates failing to install, hardware malfunctions, or issues with your computer's boot sector. Understanding these potential causes can help you in troubleshooting the issue effectively.
2. Common Causes of Automatic Repair Failures
Several factors can contribute to your computer getting stuck on Automatic Repair mode. Some of the most common causes include:
- Corrupted system files: If essential files become corrupted, it can prevent your operating system from booting properly, triggering Automatic Repair.
- Failed Windows updates: Sometimes, Windows updates don't install correctly, causing your system to enter a boot loop that initiates Automatic Repair.
- Faulty hardware: A failing hard drive or other hardware malfunction can also lead to the Automatic Repair tool being stuck.
- Incorrect BIOS settings: Misconfigured BIOS settings may prevent your system from starting correctly, triggering Automatic Repair as a fallback.
Recognizing the root cause can help you address the issue more efficiently.
3. How to Fix Your Computer Stuck in Automatic Repair Mode
There are several ways to address the "Stuck on Automatic Repair" issue. Below are the most effective solutions:

Action Computers Inc. -- Denver Location
2890 S Colorado Blvd F, Denver, CO 80222, USA
3.1. Perform a Hard Reboot
Sometimes, a simple restart can resolve the issue. Hold down the power button for about 10 seconds to force your computer to turn off. Afterward, restart the system and see if it boots correctly.

Fix It Computer Repair
2638 Geranium Ln, Fort Collins, CO 80525, USA
3.2. Boot into Safe Mode
If the issue persists, try booting into Safe Mode, which starts Windows with only essential drivers. To do this:
- Press and hold the power button to turn off the computer.
- Turn it back on and immediately press the F8 key (or Shift + F8 on some systems) to open Advanced Boot Options.
- Select Safe Mode from the options and press Enter.
Once in Safe Mode, you can try uninstalling recent updates or running a system file check to repair corrupted files.
3.3. Run CHKDSK Command
Sometimes, your hard drive may have errors that cause Windows to get stuck on Automatic Repair. Running the CHKDSK command can help fix these issues:
- Access the Advanced Startup Options by restarting the computer while holding down the Shift key.
- Go to Troubleshoot > Advanced Options > Command Prompt.
- In the Command Prompt, type chkdsk /f /r and press Enter.
- Allow CHKDSK to scan your disk and fix any issues.
3.4. Restore Your System to a Previous Point
If the above methods don't resolve the issue, you can attempt a System Restore to return your computer to a previous working state. This can help undo any recent changes or updates that caused the problem.
4. When to Consult Professional Computer Repair Services
If you've tried all troubleshooting steps and your computer is still stuck on Automatic Repair, it may be time to consult a professional repair service. Issues like a failing hard drive or deep-rooted software corruption often require expert help.
Computer repair specialists can run advanced diagnostics to identify and fix the issue, ensuring your computer is back to normal quickly.
If you need help or want to learn more about how we can assist with your Automatic Repair issue, visit Computer Repair today.